When you first receive your safe there are no recorded fingerprints. For security you must record a fingerprint. Failure to do so will compromise the safety and security of the safe.
You can record up to 20 different fingerprints for opening the safe. For best results, each individual should use their thumb or index finger only. To record a fingerprint, first press the Reset Button on the inside of the safe. The scanner will turn blue with two beeps (if the sound is turned on) and the green light flashes twice, you will then record the same finger three times as follows:
Place your finger on the scanner until there is one beep (if the sound is turned on) and the green light flashes once. Lift your finger off the scanner.
Place the same finger on the scanner for a second time, holding the finger in the same position until there is one beep (if the sound is turned on) and the green light flashes once. Lift your finger off the scanner.
Place the same finger on the scanner for a third time, holding the finger in the same position until there is two beeps (if the sound is turned on) and the green light flashes twice. Lift your finger off the scanner. Your fingerprint is now recorded.